'How To Install: A Garbage Disposal'

03:04 Feb 22, 2022 0 0

'Garbage disposals are an easy answer to some of life’s grossest problems. So watch and see how easy it is to install one!    Here’s a list of things you’re going to need..  You should have: a large, an adjustable wrench, a Hammer, a Screwdriver, a Fine Tooth saw, a bucket or bowl to catch any water and for our particular install, we had to buy a new PVC pipe set, which you can find at your local Lowe’s.    The disposal we’re installing today is the Legend Series 2600 disposer from Waste King. We chose this particular model for its performance and affordable price.   The first step is to turn off your water supply to the sink to make sure you don’t cause any major leaks.  Now, disconnect the pipes from the sink, using the wrench for the pipes and the bucket to catch any water.  With the pipes disconnected, simply take out the old sink flange.  You should be able to pop this out easily.  Now we’re going to install the new sink flange. This particular garbage disposal works the easiest with stainless steel sinks, which is what we have here today, and this rubber gasket acts as a perfect seal for the disposal, so we won’t need to use any plumber’s putty.  However, if you don’t have a stainless steel sink, you should use plumber’s putty to install the new sink flange.    When installing the new sink flange, make sure to put the flange together in the following order: First, the rubber gasket, which goes above the sink.  Then the paper gasket, the bracket, the mounting hardware, and then the rubber cushion.     A note on the wiring: some garbage disposals come ready to be plugged in, like the one we’re installing today.  However, sometimes they need to be wired in. Consult your manufacturer’s instructions to ensure proper wiring.  If you’re installing your disposal with a dishwasher line, now is the time to knock out the dishwasher plug. To do this, you’re going to use the hammer and screwdriver to simply knock it out of place.     Now it’s time to install the garbage disposal. With the sink flange in place, simply connect the disposal to the sink flange. Our Waste King uses an EZ-Mount system that allows us to quickly slide it in and lock it to the flange.    Next, you’ll need to re-connect the pipes to the disposal.  Due to our particular setup, we had to purchase a new set of PVC pipes.  You may also have to saw some of the pipes down to fit your particular sink setup.     Now connect the dishwasher line to the designated hole on the disposal.    With everything in place, place the bucket or bowl back underneath the pipes, and turn the water on to check for leaks.  If there are no leaks, plug in the disposal and test it out.' 

Tags: how to , diy , To , how , do-it-yourself

• tik tok
• food junction
• ាន់បំពង Mukbang ឆ្ងាញ់
• Davao City
• teens react
• burgers
• Eat
• Vegetable Food
• ver
• mukbang �

comments

Post